TJ's Custom Gunworks Printable Price Selector
                  ( SEPTEMBER 2013 )



Work Packages

Hourly Shop Rate

Sig Sauer Price List

Colt 1911 Price List

Revolver Price List

Rifle Price List

Rush Service Fees

Misc Handgun Work

Glock HK, Ruger, S&W, Browning, Desert Eagle, Etc

Refinishing (non-Sig)

TJ Parts

SHIPPING $ PRICES

Shipping Instructions

TJ Contact Policies

Email TJ

TJ's Custom Gunworks S.O.P. & Disclaimer

TJ's Custom Gunworks Home Page

TJ's Custom Gun Photos 2013

TJ's Custom Gunworks Frequently Asked Questions

TJ Pocket Knives & 'What's New Page'

Check All Boxes Of Work You Desire
Then Click "FINISH WORK ORDER"

(This is NOT a Commitment To The Work, Only an ESTIMATE.)


 
After Reviewing The Resulting "Work Order Request" Pop-Up Page,
Please PRINT it and Send it with Gun(s) and Money.
Or Mail / Email me your "Work Order Request" to Verify Selected Prices.
When Received, I Will Email You Conformation of Prices or Corrections Needed.

Shipping Selection HERE    /////   Detailed shipping options & explanations HERE

*** CLICK HERE IF YOU PREFER MY OLD PRICE LIST FORMAT ***

* CLICK HERE TO REMOVE BACKGROUND WALPAPER IMAGE *


*** CLICK HERE TO DOWNLOAD JAN-2012 PRICE LIST ***

TJ OFFERS MANY OTHER CUSTOM SERVICES INCLUDING:
SUPER EXTENDED SAFETIES & SLIDE CATCHES MADE TO ORDER

COMPLETE MATCH - IPSC - PPC - PIN - & PLATE GUNS
BUILT TO YOUR SPECIFICATIONS

*** MOST CUSTOM PROJECTS ARE BILLED AT "STANDARD SHOP RATE" ***
STANDARD 2013 SHOP RATE = $150 PER HOUR + PARTS & MATERIALS


IN CONTRACTING ANY WORK, YOU AGREE TO MY   FULL DISCLAIMER DISCLOSURE

***** WORK PACKAGES *****

SIG SAUER: LEVEL ONE DELUXE $399
INCLUDES: A FULL DELUXE ACTION & TRIGGER JOB, SMOOTHING OUT ALL THE INTERNALS AS WELL AS THE SLIDE & BARREL FUNCTIONING
A TJ SHORT STAINLESS TRIGGER ( OR ROUND & POLISH STOCK TRIGGER ON MODELS THAT TJ TRIGGER IS NOT AVAILABLE FOR )
THROAT & POLISH THE BARREL AND FEED RAMP TO ENHANCE FEEDING RELIABILITY

+ FIT & POLISH THE EXTRACTOR TO ENHANCE CASE EXTRACTION AND HELP PREVENT EXTRACTOR BREAKAGE.

( SIG P225 / P6 & P230/P232 ADD + $25 )
( SIG P239 & Upgrade To Stainless Trigger ADD + $20 )
( ADD CUSTOM MAINSPRING + $15 )


**********************************************************************************

SIG SAUER: LEVEL TWO - W/BLACK TEFLON PLATING ( INCLUDES LEVEL ONE ) $750
SIG SAUER: LEVEL TWO - W/HARD CHROME OR NICKEL PLATING ( INCLUDES LEVEL ONE ) $895

LEVEL 1 PLUS: INSTALL MEPROLIGHT TRITIUM NIGHT SIGHTS WITH "ORANGE GLO" FRONT SIGHT
+ PLATE SLIDE AND SMALL PARTS IN YOUR CHOICE OF:

NICKEL, HARD CHROME OR MATTE BLACK TEFLON

( OLD MODEL SIG P220 WITH INTEGRAL FRONT SIGHT + $125 )

( SIG P225 / P6 & P230/P232 ADD + $25 )
( SIG P239 & Upgrade To Stainless Trigger ADD + $20 )

**********************************************************************************

SIG SAUER: LEVEL THREE - W/BLACK TEFLON PLATING OR DURACOAT ( INCLUDES LEVELS ONE & TWO ) $1050
SIG SAUER: LEVEL THREE - W/HARD CHROME OR NICKEL PLATING ( INCLUDES LEVELS ONE & TWO )
$1195

INCLUDES LEVELS ONE & TWO PLUS:   FULL BOB OR SEMI-BOB HAMMER (ANY FINISH)
HEAT & BEND SLIDE CATCH FOR EASIER ACCESS (45o OR 90o OR ##o)
INSTALL A SET OF TJ STAINLESS GRIP SCREWS (ANY FINISH)
SATIN POLISH BARREL HOOD - BARREL ROUND - & BARREL TIP
SUPER GRIT-GRIP TAPE ON FRONT STRAP

(OLD MODEL SIG P220 ADD + $125 )


**********************************************************************************

COLT 1911: LEVEL ONE *** MINIMUM - MINI RELIABILITY PACKAGE *** $125

INCLUDES: THROAT & POLISH THE BARREL AND FEED RAMP TO ENSURE FEEDING RELIABILITY
FIT & POLISH THE EXTRACTOR (RECUT HOOK - ADJUST TENSION - BEVEL & POLISH FACE TO HELP PREVENT BREAKAGE)
BEVEL YOUR EJECTOR FOR PROPER EJECTION THROW ANGLE
SATIN POLISHED BARREL HOOD FOR SMOOTHER CYCLING
SURFACE & SMOOTH OFF BREECH FACE


**********************************************************************************

COLT 1911: LEVEL ONE *** FULL RELIABILITY PACKAGE *** $250
INCLUDES: THROAT & POLISH THE BARREL AND FEED RAMP TO ENSURE FEEDING RELIABILITY
FIT & POLISH THE EXTRACTOR (RECUT HOOK - ADJUST TENSION - BEVEL & POLISH FACE TO HELP PREVENT BREAKAGE)
A CUSTOM EXTENDED AND BEVELED COMMANDER EJECTOR FOR PROPER EJECTION THROW ANGLE
MILLING THE EJECTION PORT LOWER TO ALLOW SPENT CASES TO EXIT UNRESTRICTED
SATIN POLISHED BARREL HOOD FOR SMOOTHER CYCLING
SURFACE & SMOOTH OFF BREECH FACE + CHECK ALL FUNCTIONING RELIABILITY.


**********************************************************************************

COLT 1911: LEVEL TWO ( INCLUDES THE FULL LEVEL ONE PACKAGE ) $750
PLUS: A FULL DELUXE ACTION & TRIGGER JOB
A CUSTOM MATCH COMMANDER HAMMER
( MODIFIED ED BROWN )
A CUSTOM 3 HOLE ALUMINUM MATCH TRIGGER
AND A DROP-IN BEAVERTAIL GRIP SAFETY
(OTHER BEAVERTAIL GRIP SAFETIES AVAILABLE AS AN UPGRADE)


**********************************************************************************

COLT 1911: LEVEL THREE ( INCLUDES LEVEL ONE & TWO ) $1050
PLUS: A CHECKERED FLAT MAINSPRING HOUSING
A FULL LENGTH GUIDE ROD ASSEMBLY
CUT FRAME AND INSTALL A STANDARD BEAVERTAIL GRIP SAFETY
(OTHER BEAVERTAIL GRIP SAFETIES AVAILABLE AS AN UPGRADE)
SATIN POLISH BARREL HOOD - BARREL ROUND - & BARREL TIP
SUPER GRIT-GRIP TAPE ON FRONT STRAP


**********************************************************************************

COLT 1911: LEVEL FOUR ( INCLUDES LEVELS 1 + 2 + 3 ) $1495
PLUS: INSTALL AN AMBIDEXDEROUS THUMB SAFETY
A CUSTOM CONTOURED EXTENDED SLIDE CATCH
A CHECKERED EXTENDED MAGAZINE RELEASE
BEVEL THE FRAME MAGAZINE WELL
AND A PAIR OF EXOTIC WOOD GRIPS ( MY CHOICE )


**********************************************************************************

COLT 1911: LEVEL FIVE "FULL MATCH" ( INCLUDES LEVELS 1 + 2 + 3 + 4 ) $3150
PLUS: INSTALLATION OF A CUSTOM MATCH BARREL FITTED WITH A TJ TRI-MAG TRIPLE CHAMBER FULL PROFILE COMPENSATOR
S&A EXTENDED MAGAZINE WELL + FILE-FIT TO FRAME MAG WELL
STIPPLE THE TRIGGER GUARD AND FRAME FRONT STRAP
EXTRA SMOOTHING THROUGHOUT THE ACTION WORKS
AND A FULL MATTE TEFLON COATING OR DURACOATING OVER THE ENTIRE GUN


**********************************************************************************

REVOLVER: LEVEL ONE $275
INCLUDES: A FULL DELUXE ACTION JOB WITH INTERNAL FRAME POLISH,
ROUND - RADIUS - & POLISH THE TRIGGER TO ENHANCE THE D.A. PULL,
AND "ORANGE, GREEN, YELLOW, OR RED DAYGLO" HIGHLIGHTING ON THE FRONT SIGHT.

RUGER DOUBLE ACTION OR DAN WESSON REVOLVERS ADD + $20


**********************************************************************************
REVOLVER: LEVEL TWO ( INCLUDES LEVEL ONE ) $485


PLUS: TIME THE ACTION MECHANISM
BOB & REVERSE CUT THE HAMMER
INSTALL A FIXED EXTERNAL TRIGGER STOP TO CRISP UP THE PULL AND REMOVE ANY OVERTRAVEL
AND INSTALL A PAIR OF HOUGE RUBBER GRIPS


RUGER DOUBLE ACTION OR DAN WESSON REVOLVERS ADD + $20

SIG SAUER PRICE LIST:

( MOST PRICES ARE APPLICABLE FOR: BERETTA - S&W - RUGER & TAURUS SEMI AUTOS )
(NOTE: Sig P245 prices are the same as the P220, and Sig P232 are the same as the P230)

DELUXE ACTION JOB - MATCH QUALITY WORK ( SEE NOTES BELOW ) ................................. $295
( INCLUDES ALL TRIGGER AND ACTION WORK & + SMOOTHING INSIDE SLIDE FOR FUNCTIONAL RELIABILITY )

ADD CUSTOM MAINSPRING ..............................................................................................................  + $15

ACTION JOB ON D.A. AUTOS OTHER THAN THOSE SPECIFIED ABOVE .......................... $175 - $350

TRIGGER: ROUND - RADIUS - POLISH ( FOR IMPROVED D.A. FEEL & PULL THROUGH )...... $85

TJ STAINLESS SHORT TRIGGER ............................................................................................................. $65
( AVAILABLE IN SATIN POLISHED OR BLACK STAINLESS) ( 220-226-228-229-245 )


TJ STAINLESS SHORT TRIGGER ( FOR P225 / P6 & P239 - POLISHED OR SATIN STAINLESS ) .......................... $95

THROAT & POLISH BARREL AND FEED RAMP ................................................................................... $65
( CONTOUR & MIRROR POLISH FOR EXTRA FEEDING RELIABILITY )

THROAT & POLISH BARREL AND FEED RAMP ON SIG P230/P232 OR WALTHER PPK ................. $75

FIT & POLISH EXTRACTOR ( CUT HOOK - POLISH FACE - BEVEL EDGES - ADJ. TENSION ) ( HELPS AGAINST BREAKAGE ) ... $25

HAMMER: BOB OFF SPUR (FULL) ( FOR QUICK NON SNAG DRAWING AND LIABILITY ) ( MANDITORY D.A. FIRST SHOT ) ..... $75

HAMMER:"SEMI-BOB" (ROUND OFF EDGES - BEVEL FROM REAR FOR DRAW-CUT ONE WAY SERRATIONS - POLISH ) .........$125

TJ's "SIG-SAFE" TRIGGER BLOCKING PUSH BUTTON SAFETY ( DISCRETE WEAPON RETENTION SAFETY DEVICE ) ......$495
( "SIG-SAFE "LIABILITY WAIVER MUST BE SIGNED PRIOR TO INSTALLATION ) (AVAILABLE FOR 226,228,229,220,245,239)

SATIN POLISH BARREL ( REMOVE BLUING AND SATIN FINISH ALL 7 ANGLES VIEWED THROUGH EJECTION PORT ) .......... $25

HIGH POLISH BARREL ( POLISH ALL 7 ANGLES VIEWED THROUGH EJECTION PORT ) ( SMOOTHS SLIDE FUNCTION ) $55

JEWELL BARREL 3 SIDES ( 7 ANGLES - INCLUDES PRE-POLISHING THE BARREL ) ............... $125

JEWELL TOP OF BARREL ONLY ( HIDES SCRATCHES / GALLING ) ( SIDES LEFT BLUE ) ............................... $65

JEWELL EXTRACTOR ( STAINLESS SLIDE MODEL GUNS ONLY (Type 2)) .......................................................... $15

POLISH BARREL TIP .................................................................................................................................... $10

POLISH BARREL "ROUND" ....................................................................................................................... $15

*2013 Sig MFG   REMOVE BARREL SHARP EDGES & CORNERS ONLY (FINISH REMAINS THE SAME)........ $15

*2013 Sig MFG   SATIN POLISH BARREL ( REMOVE BLUING AND SATIN FINISH ALL 7 ANGLES VIEWED THROUGH EJECTION PORT ) ...... $65

*2013 Sig MFG   HIGH POLISH BARREL ( POLISH ALL 7 ANGLES VIEWED THROUGH EJECTION PORT ) ( SMOOTHS SLIDE FUNCTION ) $95

*2013 Sig MFG   JEWELL BARREL 3 SIDES ( 7 ANGLES - INCLUDES PRE-POLISHING THE BARREL ) ......... $165

*2013 Sig MFG   JEWELL TOP OF BARREL ONLY ( HIDES SCRATCHES / GALLING ) ( SIDES LEFT BLUE ) ........................... $95

*2013 Sig MFG   HIGH POLISH EXTRACTOR ( Type 4 SLIDE MODEL GUNS ONLY ) .......................................... $35

*2013 Sig MFG   SATIN POLISH EXTRACTOR ( Type 4 SLIDE MODEL GUNS ONLY ) ........................................... $25

*2013 Sig MFG   JEWELL EXTRACTOR ( Type 4 SLIDE MODEL GUNS ONLY ) ....................................................... $45

*2013 Sig MFG   POLISH BARREL "ROUND" ............................................................................................... $25

POLISH GUIDE ROD TIP ................................................................................................................................ $5

POLISH GUIDE ROD "ROUND".................................................................................................................. $10

STAINLESS STEEL CUSTOM GUIDE ROD .............................................................................................. $75

POLISH EXTERNAL SMALL PARTS (Decocker, Slide Catch, Mag Release, Etc) ......... EACH = $15-$45

TJ STAINLESS STEEL GRIP SCREWS ( FOR SIG SAUER PISTOLS - AVAILABLE IN SILVER OR BLACK STAINLESS ) ...... $15

TJ STAINLESS STEEL GRIP SCREWS ( EXTRA SET - STANDARD SILVER OR BLACK STAINLESS ) ......................... $15

TJ STAINLESS STEEL GRIP SCREWS WITH A CUSTOM SATIN POLISH FINISH ...........................$22

TJ STAINLESS STEEL GRIP SCREWS WITH A CUSTOM HIGH POLISH FINISH ............................$25

TJ STAINLESS STEEL GRIP SCREWS FOR SIG P239 IN BLACK STAINLESS  .................................$18

REMOVE TRIGGER GUARD HOOK ( TANG ) ( + REFINISHING CHARGES ) ................................. $75

"ASP" RELIEVE CUT TRIGGER GUARD ................................................................................................$150
( FOR QUICKER FINGER ACCESS - ESPECIALLY WITH GLOVES ) (+REFINISHING)

STIPPLE OR SERRATE ( HORIZONTAL ) TRIGGER GUARD ( + REFINISHING CHARGES ) ......... $75

STIPPLE FRONT STRAP ( + REFINISHING CHARGES ) ......................................................................... $150

SERRATE ( HORIZONTAL ) FRONT STRAP ( + REFINISHING CHARGES ) ....................................$250

SUPER GRIT-GRIP TAPE ON FRONT STRAP  ......................................................................................... $35
( FOR A GOOD POSITIVE GRIP-HOLD ON YOUR GUN AT A FRACTION OF THE PRICE OF CHECKERING OR STIPPLING )

MELT JOB (POLISH & DE-BURR SHARP EDGES & CORNERS) ( + REFINISHING CHARGES ) ...$100 - $150

60% PLATING - MATTE BLACK TEFLON ( SLIDE AND ALL EXTERNAL SMALL PARTS ) .....................................$195

60% PLATING - HARD CHROME OR NICKEL ( SLIDE AND ALL EXTERNAL SMALL PARTS ) ...............................$350

MATTE BLACK TEFLONENTIRE PISTOL ( COMPLETE EXTERNAL PROTECTION AGAINST CORROSION & GLARE ) .............$350

DURACOAT ENTIRE PISTOL ( COMPLETE EXTERNAL PROTECTION AGAINST CORROSION ) ............. $350 - $495
( ALL COLORS AVAILABLE OR COMBINATION OF COLORS - PATTERNS - CAMO *Extra$ )   ( Needs 4 Week Cure Time )

NICKEL PLATE ENTIRE PISTOL (MATTE - BRUSHED SATIN - ) ( RECOMMEND MATTE TEXTURE ON FRAME) $495
( HIGH GLOSS POLISHED ADD +$50 )

HARD CHROME ENTIRE PISTOL ( MATTE - BRUSHED SATIN ) ( MATT FINISH ON FRAME ONLY ) ... $495

( HIGH GLOSS POLISHED ADD +$50 )

24K PLATING ON SLIDE AND SMALL PARTS ( HIGH GLOSS ) ( FOR SHOW NOT CONSTANT WEAR) $650

CUSTOM MARBLE ANODIZING ON FRAME * ( YOUR COLOR(S) WITH CONTRASTING MARBLE SWIRLING ) ..... $399

CUSTOM MARBLE DELUXE ANODIZING ON FRAME WITH PRE-POLISH ................................ $499
( YOUR COLOR(S) WITH SWIRLING ) ( PRE-POLISH ADDS A SHINE TO THE COLORS AND BRINGS THEM ALIVE BETTER )


CUSTOM  ANODIZING ON FRAME * ( ANY ONE SINGLE COLOR or BLACK - Dull Matte Finish) ......... $250

CUSTOM  ANODIZING ON FRAME * ( ANY ONE SINGLE COLOR or BLACK - Semi Gloss Finish) ....... $275

SIG P229 ½ SLIDE POLISH ( POLISH SLIDE FACE - LEAVE REMAINDER OF SLIDE BLACK FOR TWO TONE EQUINOX EFFECT ) $295

TJ "SIG-COMP" 2 PORT COMPENSATOR INSTALLED ON YOUR EXTENDED BARREL ........... $695
( INCLUDES COMPENSATOR (PART), THREADING OF YOUR EXTENDED BARREL, & COMPENSATOR FITTING )

TJ "SIG-COMP" 2 PORT COMPENSATOR + NEW MATCH STAINLESS BARREL INSTALLED .... $1150
( INCLUDES COMPENSATOR, MATCH EXTENDED BARREL, THREADING, BARREL & COMP FITTING )

FIT - INSTALL BARSTO BARREL + REMOVE MACHINE / TOOL MARKS & BLEMS ......... $100-$150
( YOU SUPPLY BARREL )

TJ "BERETTA TRI-MAG" 5 PORT COMPENSATOR INSTALLED (FACTORY BARREL IS OK)   $795
( INCLUDES COMPENSATOR (PART), THREADING OF YOUR BARREL, & COMPENSATOR FITTING )
( USE YOUR BARREL OR ADD A STAINLESS MATCH BARREL BELOW FOR $295 )

MATCH STAINLESS BARREL INSTALLED + REMOVE MACHINE / TOOL MARKS + SATIN POLISH $295 - $395
( BERETTA 92FS/M9 - SIG SAUER - SPRINGFIELD XD - GLOCK - MISC SEMIAUTOS )

BERETTA 92F/M9 MILLETT ADJUSTABLE TARGET SIGHTS WITH ACCURIZER PADS ........................ $295

SIG P229 POLISH ENTIRE SLIDE HIGH GLOSS ( WILL BLUR LETTERING AND SMOOTH SERRATIONS ) $350

SLIDE CATCH OR DECOCKER - HEAT* & BEND   (SPECIFY WHICH YOU WANT OR BOTH x2 $)   $85
( WILL ASSIST IN EASE OF OPERATION AND RELEASE OF SLIDE WHEN LOCKED BACK ) 

( *SLIGHTLY DISCOLORS THE STEEL / REFINISHING IS EXTRA $ )


TRITIUM NIGHT SIGHTS ( MEPROLIGHT - TJ'S PREFERRED CHOICE ) (225-226-228-229-239-245-NEWER 220)   $155

TRITIUM NIGHT SIGHTS ( AMERIGLO OR TRIJICON 3 DOT ) ( 225-226-228-229-239-NEWER 220) ...... $185

ADJUSTABLE NIGHT SIGHTS FOR SIG SAUER
( TRIJICON = N/A )
( MMC = N/A 2010)
( MEPROLIGHT = $295)

( *** ALL SIGHT PRICES INCLUDE PARTS & LABOR *** )
TRITIUM NIGHT SIGHTS FOR OLD MODEL P220 OR P230 ( THREE DOTS OR BAR-DOT ) ............ $250-$295

MILLETT ADJUSTABLE TARGET SIGHTS ( 225-226-228-229-239-245-NEWER 220) ............................... $250

MILLETT ADJUSTABLE TARGET SIGHTS FOR OLD MODEL P220 ............................................... N/A

SIGHT INSTALLATION ON CUSTOMER SUPPLIED SIGHTS ............ (Typically $45-$55) ....... $45-$95

DAYGLO - "ORANGE GLO" OR "GREEN GLO" HIGHLIGHT ON ANY FRONT SIGHT ............... $15

SIGHTING IN PISTOLS ................................................................. ( I SUPPLY THE AMMO ) ................ $75

SIGHTING IN PISTOLS ............................................................ ( YOU SUPPLY THE AMMO ) .............. $45

GUN CLEANING  - FULL DETAILED CLEANING & INSPECTION .................................................... $95

MINIMUM GUN CLEANING CHARGE ( BASIC / QUICK CLEANING & OIL )................................. $35

( Please read FAQ before unchecking this item )
*"MINIMUM GUN CLEANING FEE" does NOT include complete disassembly or barrel scrubbing/deleading.

( NOTE: GUN(S) WILL BE RETURNED AS YOU SENT THEM UNLESS YOU ORDER CLEANING )

ALL MY ACTION JOBS INCLUDE :
  • SMOOTH OUT & LIGHTEN DOUBLE ACTION PULL 25% - 40% ( DEPENDING ON GUN )
  • SMOOTH & LIGHTEN SINGLE ACTION TAKE UP + CRISP UP LET OFF "BREAK"
    ( NORMAL 3 - 3 1/2 LBS IF NOT SPECIFIED)

  • DEBURR & SMOOTH OUT BARREL AND SLIDE FOR IMPROVED FUNCTION RELIABILITY
  • CONTOUR & MIRROR POLISH ALL INTERNAL ACTION & FUNCTION CONTACT PARTS
  • SHORTEN MAINSPRING TO TUNE D.A. PULL
    ( UNLESS SPECIFICALLY REQUESTED NOT TO )

  • CHECK GENERAL CONDITION OF ALL INTERNAL PARTS AND THEIR FUNCTION
  • PRIMER TEST GUN FOR DETONATION RELIABILITY


WORK TURNAROUND TIME ( IN SHOP DOWN TIME )
SIG LEVEL ONE OR SIMILAR WORK / COLT LEVEL TWO / MATTE TEFLON : 2-4 WEEKS
SIG LEVEL TWO / NICKEL PLATING / HARD CHROME : 8 - 14 WEEKS

RUSH SERVICE IS AVAILABLE!
ONE WEEK +/- TURNAROUND: $100.00 EXTRA ( + SHIPPING CHARGES )

24 HOUR +/- OVERNIGHT TURNAROUND: $300.00 EXTRA ( + SHIPPING CHARGES )


$ PER GUN / NOT AVAILABLE ON NICKEL / HARD CHROME & CERTAIN OTHER JOBS
*** YOU MUST CALL OR EMAIL AHEAD TO SCHEDULE RUSH JOBS ***

Miscellaneous Non-Standard Handgun Work :

*Most Semi-Auto Handguns can follow most of the same prices as the Sig Sauer Price List
Some exceptions are listed below:

FN Five-seveN 5.7x28mm (Fabrique Nationale) TRIGGER JOB (Smooth & Lighten Pull) $295
Desert Eagle (Magnum Research) TRIGGER JOB (Smooth & Lighten & Shorten Pull) $350
Browning High Power ACTION & TRIGGER JOB W/SPRINGS $395
Browning Hi-Power - 90% PRICES ARE SAME AS 1911 PRICE LIST BELOW
Kel-Tec / Ruger LCP - TRIGGER JOB (Smooth & Slightly Lighten Pull) $250
Kel-Tec / Ruger LCP - Throat Feed Ramp, Polish Extractor, Etc - SEE SIG PRICE LIST
Colt S.A. or Copies (Single Action Coyboy Type Revolvers) TRIGGER JOB $195
Colt S.A. or Copies (Single Action Coyboy Type Revolvers) ACTION + TRIGGER JOB $295
Beretta 92 / 96 Series - 90% PRICES ARE SAME AS SIG SAUER PRICE LIST ABOVE
Taurus Semi Auto Pistols - 90% PRICES ARE SAME AS SIG SAUER PRICE LIST ABOVE
Taurus or Rossi Revolvers - 90% PRICES ARE SAME AS S&W REVOLVER PRICE LIST
Ruger Semi Auto "P Series" Pistols - 90% PRICES ARE SAME AS SIG SAUER PRICE LIST ABOVE
S&W Semi Auto Pistols - 90% PRICES ARE SAME AS SIG SAUER PRICE LIST ABOVE
CZ Semi Auto Pistols - 90% PRICES ARE SAME AS SIG SAUER PRICE LIST ABOVE
Walther PPK - PPKS Pistols - 90% PRICES ARE SAME AS SIG SAUER 230 PRICE LIST ABOVE
Glock Action / Trigger Job $295 (Includes New Striker/Trigger Springs + Connector)

Colt 1911 and copies :

COMPLETE ACTION AND MATCH TRIGGER JOB ...............................................................................$295
( INCLUDES EXTRA SMOOTHING & POLISHING IN SLIDE ETC. )
***  INCLUDES REWORKING AND POLISHING ALL INTERNAL FUNCTION PARTS AS WELL AS SMOOTHING SLIDE / BARREL FUNCTION  ***


TRIGGER JOB ONLY = ( CUT THE HAMMER / SEAR  ONLY ).......................................................... $195
( BASICALLY WHAT MOST "OTHER GUNSMITHS" CALL AN ACTION JOB )

SERIES '80 TO '70 CONVERSION SHIM ( TO REPLACE FIRING PIN BLOCK ACTUATORS - MATCH GUNS ) .... $8

CUSTOM MATCH ALUMINUM TRIGGER INSTALLED * ( PART & LABOR ) ......................................... $85
***** ( INCLUDES REMOVING BOTH FORE & AFT TRAVEL AND SLOP ) *****

REWORK / REBUILT YOUR ALUMINUM TRIGGER * ( LABOR TO MAKE IT SIMILAR TO A MATCH TRIGGER ) .... $50
***** ( INCLUDES REMOVING BOTH FORE & AFT TRAVEL AND SLOP ) *****

CUSTOM MATCH ALUMINUM TRIGGER INSTALLED ON GOLD CUP OR PARA ORD ........ $95-$125

CUSTOM MATCH COMMANDER HAMMER INSTALLED ( INCLUDES PREP WORK ) .............. $95

CUT ONE WAY SERRATIONS OR CHECKER HAMMER ( FOR EASIER COCKING ) ( LABOR ) $65

CUT BEAVERTAIL NOTCH AND/OR HAMMER TO ACCOMODATE STANDARD MATCH HAMMER $25
( REQUIRED ON SOME SPRINGFIELD & PARAORD UNLESS BOTH HAMMER & GRIP SAFETY ARE REPLACED )

THROAT & POLISH BARREL AND FEED RAMP * ............................................................................ $65
* ( CONTOUR / ANGLE / MIRROR POLISH TO ASSURE FEEDING RELIABILITY )

FIT & POLISH EXTRACTOR* ..................................................................................................................... $25
* ( RECUT HOOK - ADJUST TENSION - BEVEL - POLISH FACE TO HELP PREVENT BREAKAGE )

INSTALL CUSTOM EXTENDED EJECTOR ( INCLUDES FITTING & ANGLE OF THROW ADJUSTMENT ) ... $45

MILL EJECTION PORT LOWER TO ALLOW UNRESTRICTED EJECTION ...................................... $85

SATIN POLISH BARREL ( REMOVE BLUING AND SATIN FINISH SECTION VIEWED THROUGH EJECTION PORT ) ................ $25

HIGH POLISH BARREL ( POLISH SECTION VIEWED THROUGH EJECTION PORT ) ( SMOOTHS SLIDE FUNCTION ) ....... $55

JEWELL BARREL  ( INCLUDES PRE-POLISHING THE BARREL {ABOVE} ) ................................. $125

EXTENDED BEAVERTAIL GRIP SAFETY ( PART ) ....................................................................... $35 - $65

{ BEAVERTAIL FITTING (LABOR TO FIT LOCKING TANG ) .................................................... $10 - $35

{ CUT AND SHAPE FRAME ( FOR INSTALLATION OF WILSON / CLARK / BROWN BEAVERTAILS )   $100 - $185

TJ SERIES TWO HIGH RIDE BEAVERTAIL GRIP SAFETY INSTALLED ( PARTS & LABOR ) ('80 COLT ADD $20) $110

CHECKER MAGAZINE RELEASE ( LABOR ) ........................................................................................... $25

INSTALL EXTENDED CHECKERED MAGAZINE RELEASE ( PARTS & LABOR ) ........................... $45

CHECKER TRIGGER GUARD ( FRONT ) ....................( + REFINISHING CHARGES ) .....................$250

STIPPLE OR SERRATE ( HORIZONTAL ) TRIGGER GUARD ( + REFINISHING CHARGES ) ...... $75

STIPPLE FRONT STRAP ( + REFINISHING CHARGES ) .......................................................................$150

SERRATE ( HORIZONTAL ) FRONT STRAP ( + REFINISHING CHARGES ) ....................................$250

SUPER GRIT-GRIP TAPE ON FRONT STRAP  ......................................................................................... $35
( FOR A GOOD POSITIVE GRIP-HOLD ON YOUR GUN AT A FRACTION OF THE PRICE OF CHECKERING OR STIPPLING )

{ COMPENSATORS ( PARTS ) ( 9mm / .45 / .38 SUPER ) ............................................................. $150 - $800

CUSTOM MADE COMPENSATORS ( PARTS ) ( 9mm / .45 / .38 SUPER ) .......................... $600 - $2000

{ COMPENSATOR FITTING & INSTALLATION ( LABOR ) ( + REFINISHING CHARGES ) $75 - $250

{ CUT THREADS ON BARREL FOR COMPENSATORS ..........................................................................$175

{ MATCH BARRELS ( PARTS ) ....................................................................................................... $195 - $295

{ MATCH BARREL FITTING & INSTALLATION ...................................................................... .. $50 - $250

TJ TRI-MAG COMPENSATOR& MATCH BARREL INSTALL ........................................................... $995
( INCLUDES ALL PARTS & LABOR EXCEPT REFINISHING)
( STAINLESS STEEL COMP ...................................................ADD $100 )


FULL LENGTH RECOIL GUIDE ROD & BUFFER INSTALLED .................................................. $65 - $85

EXTENDED OR AMBI SAFETY INSTALLED ( PARTS & LABOR ) .......................................... $65 - $175

EXTENDED SLIDE CATCH INSTALLED ( PARTS & LABOR ) .................................................... $45 - $85

FLAT AND / OR CHECKERED MAINSPRING HOUSING INSTALLED ...................................... $50 - $85

BEVEL MAGAZINE WELL ( LABOR ) ............................................................................................... $45 - $95

S & A MAGAZINE WELL INSTALLED ( DOES NOT INCLUDE BEVELING FRAME WELL OR MODIFYING PART ) ..... $95

MELT JOB (POLISH & DE-BURR SHARP EDGES & CORNERS) ( + REFINISHING CHARGES )   $95 - $195

BOMAR OR MILLETT LOW PROFILE SIGHTS MILLED AND INSTALLED ( PARTS & LABOR )   N/A

MILLETT ADJUSTABLE SIGHTS INSTALLED (WHITE OUTLINE REAR & .312 ORANGE FRONT ) ........ $295

MILLETT ADJUSTABLE SIGHTS FOR OTHER PISTOLS ........................................................ $175 - $275

TRITIUM NIGHT SIGHTS ( STAKE-ON COLT 1911 ) ( NON ADJUSTABLE ) ................................. $250

TRITIUM NIGHT SIGHTS - MILL CUT DOVETAIL FOR FRONT SIGHT ( NON ADJUSTABLE ) $295

TRITIUM NIGHT SIGHTS - GUNS WITH EXISTING DOVETAIL FOR FRONT SIGHT ( NON ADJUSTABLE ) $175

TRITIUM NIGHT SIGHTS FOR OTHER PISTOLS     ( FIXED OR ADJUSTABLE - VARIOUS BRANDS )     $175 - $375

ACRYLIC SIGHT INSERTS INSTALLED IN ANY FRONT SIGHT ( "RED RAMP" OR ANY COLOR ) ...... $65

DAYGLO - "ORANGE GLO" OR "GREEN GLO" HIGHLIGHT ON ANY FRONT SIGHT ............... $15

GRIP INLAYS RECESSED INTO YOUR GRIPS ( LABOR ONLY - PER SIDE) .......................... $45 - $95
( CHARMS / PINS / EARINGS / MINI BADGES / OR ANYTHING FLAT! )
("Wood or Rubber" - Other Grip Materials EXTRA $$$ )


SIGHTING IN PISTOLS ................................................................. ( I SUPPLY THE AMMO ) ................ $75

SIGHTING IN PISTOLS ............................................................ ( YOU SUPPLY THE AMMO ) .............. $45

GUN CLEANING  - FULL DETAILED CLEANING & INSPECTION .................................................... $95

MINIMUM GUN CLEANING CHARGE ( BASIC / QUICK CLEANING & OIL )................................. $35

*"MINIMUM GUN CLEANING FEE" does NOT include complete disassembly or barrel scrubbing/deleading.
( Please read FAQ before unchecking this item )

( YOUR GUN WILL BE RETURNED AS YOU LEFT IT UNLESS YOU ORDER IT CLEANED )

REVOLVER:


DELUXE ACTION JOB WITH COMPLETE INTERNAL FRAME POLISH ..........................................$195
( INCLUDES EXTRA SMOOTHING,  POLISHING & TUNING )

BASIC ACTION JOB ( LIGHTEN & REDUCE TRIGGER PULL ) ......................................................... $150
( NO INTERNAL FRAME POLISH ETC )

P.D. DUTY ACTION JOB ( SMOOTH & REDUCE D.A. PULL YET RETAIN 3 LB + SINGLE ACTION AS PER REGS ) $225

TIME ACTION ( ELIMINATE TWO STAGE LOCKING EFFECT ON S&W REVOLVERS ) ......... + $20

RUGER DOUBLE ACTION OR DAN WESSON REVOLVERS ................................................ ADD + $20

ROUND / RADIUS / AND POLISH TRIGGER ............................................................................... $65 - $95
( IMPROVES DOUBLE ACTION FEEL & STROKE TO "ROLL WITH THE PULL" )

SKIN & POLISH HAMMER ( INCLUDES DEBURRING ) ................................................................................ $100

BOB OFF HAMMER SPUR ( FOR NON - SNAG DRAWS & LIABILITY )   ( MAKES GUN D.A. ONLY ON FIRST SHOT )   $75

BOB OFF HAMMER SPUR AND REVERSE CUT ( MORE COSMETIC - FLOWS WITH FRAME CONTOUR ) $100

INSTALL FIXED EXTERNAL TRIGGER STOP ON TRIGGER GUARD .............................................. $95
( ELIMINATES OVER TRAVEL AND CRISPS UP PULL )

INSTALL SIGHT RIBS AND / OR SCOPE BASES ( + PARTS ) .................................................. $95 - $350
( DRILL / TAP / AND INSTALLATION LABOR ONLY)

REVOLVER BULL BARRELS AND / OR COMPENSATORS INSTALLED .................................... P.O.R.

ROUND BUTT CONVERSION ON SQUARE BUTT FRAME ( GRIPS & REFINISHING NOT INCLUDED ) $150 - $195

TJ ELECTROPORTING( LIKE MAGNAPORTING EXCEPT HAS DETAILED LIGHTNING BOLT SHAPE ) ... $350 - $550

BARREL PORTING  ( SERIES OF ROUND EXHAUST PORTS TO COMPENSATE MUZZLE RISE ) .............. $250 - $450

RIFLE:
TRIGGER JOB ( LIGHTEN & CRISP UP TRIGGER PULL ) ...................................................... $150 - $300

RIFLE ACTION & TRIGGER JOB ( SMOOTH OUT BOLT ACTION + TRIGGER JOB ) ..... $175 - $375

SEMI AUTO RIFLE TRIGGER JOB ( LIGHTEN TRIGGER PULL ) ......................................... $175 - $350

SEMI AUTO RIFLE ACTION & TRIGGER JOB ( SMOOTH OUT MECHANISM + TRIGGER JOB ) ... $200 - $500

RIFLE OR SEMI AUTO - THROAT & POLISH FEED RAMP ( AS MUCH AS POSSIBLE / ACCESSIBLE )   $85


 

CUSTOM FINISH ALTERATIONS

( PRICES SHOWN ARE FOR HANDGUNS ) ( PLEASE READ NOTATIONS )

HIGH POLISH STAINLESS STEEL GUNS .......................................................................... $295 - $495

HIGH POLISH STAINLESS STEEL SLIDE ( NOTE: LETTERING MAY BE BLURRED OR FADED FROM BUFFING ) $350

REBLUEING - STANDARD COMMERCIAL GRADE ............................................................. $295 - $395

BLACK OXIDE REBLUEING - STANDARD COMMERCIAL GRADE ........................................ $295 - $395
( DARKER / BLACKER THEN STARDARD BLUEING )

DEEP HIGH GLOSS REBLUEING ( SUPER DELUXE GRADE ) .................................................. $395-$495
( SIMILAR TO PYTHON OR GOLDCUP BLUEING )

MATTE BLACK TEFLON PLATING ( FLAT POROUS BLACK ANTI-CORROSION FINISH ) .............. $195 - $395
( EXCELLENT FINISH FOR HIDING RUST PITTING OR SCRATCHES OR TO COVER UP WORN OUT GUNS )
( 100% NON REFLECTIVE - 100% NON CORROSIVE EXTERNAL FINISH )

MATTE BLACK TEFLON ON SLIDE ONLY ................................................................................................... $150

MATTE BLACK TEFLON ON FRAME ONLY ............................................................................................... $165


DURACOAT ENTIRE PISTOL ( COMPLETE EXTERNAL PROTECTION AGAINST CORROSION ) ..... $350 - $495
( ALL COLORS AVAILABLE OR COMBINATION OF COLORS - PATTERNS - CAMO *Extra$ )   ( Needs 4 Week Cure Time )

NICKEL PLATING ( MATTE - BRUSHED SATIN - OR HIGH GLOSS ) ................................... $395 - $595

HARD CHROME ( STAINLESS STEEL PLATING ) ( MATTE - BRUSHED SATIN - OR POLISHED ) .. $395 - $595

½ GUN PLATED ( ANY FINISH ) ..................................................................................................... $195 - $350

TWO TONE PLATING ................................................................................................................................ + $25

24K GOLD PLATING ON SLIDE OR FRAME .............................................................................. $395 - $595

24K GOLD / ANTIQUE GOLD / OR ANTIQUE SILVER PLATING ON SMALL PARTS ( EACH ) $55 - $95

GOLD OR SILVER FILL IN LETTERING ......................................................................................... $15 - $95
( QUALITY OF FILLING DEPENDS ON DEPTH OF LETTERING AND POROSITY OF FINISH )

PLEASE NOTE ON PLATING & REFINISHING:
MY REFINISHING PRICES MAY INITIALLY APPEAR HIGHER THAN SOME OF MY COMPETITORS, THIS IS BECAUSE MY PLATING PRICES ALSO INCLUDE METAL PREPARATION BOTH BEFORE AND AFTER THE ACTUAL PLATING. THIS IS THE ONLY WAY TO ASSURE THAT ANY UNWANTED POROSITY WILL BE ELIMINATED AND THUS NOT AFFECT THE FUNCTION PARTS. MY PLATING PRICES ALSO INCLUDE CLEANING UP AND INSPECTING ALL INTERNAL PARTS AS WELL AS PROPERLY FITTING PARTS AFTER PLATING, NOT JUST SLOPPING EVERYTHING BACK TOGETHER.
ASK MY COMPETITORS IF THEY DO ALL THIS . . . THEN COMPARE PRICING.
 

CUSTOM JEWELLING ( DIAMOND POLISHING )

AUTO PISTOL BARREL ..................................................................................................................... $75-$150

HAMMER OR TRIGGER( *AFTER POLISHING + POLISHING CHARGES IF APPLICABLE ) $25-$45

REVOLVER 85% JEWELL & POLISH ( AS PICTURED ON BUSINESS CARD ) ............................. $895
( JEWELL FRAME FACE + POLISH CYL - BARREL - UNDER FRAME - MOST SMALL PARTS ) ( * HAMMER & TRIGGER EXTRA )
REMOVE SCRATCHES OR MACHINE MARKS - UPCHARGES ................................................ $15-$150


 
 

*** REFINISHING NOTE :
REMOVING CASTING PITS - FACTORY MACHINE MARKS - METAL GRAINING - DEEP SCRATCHES OR DEEP RUST PITTING COST EXTRA AND WILL NOT BE REMOVED UNLESS REQUESTED PRIOR TO STARTING WORK
 
 

TJ OFFERS MANY OTHER CUSTOM SERVICES INCLUDING:
CUSTOM FRAME CUTDOWNS FOR SPECIAL CARRY APPLICATIONS
CUSTOM FINGER GROOVE ADDITIONS WELDED ON TO FRAME
SUPER EXTENDED SAFETIES & SLIDE CATCHES MADE TO ORDER

COMPLETE MATCH - IPSC - PPC - PIN - & PLATE GUNS
BUILT TO YOUR SPECIFICATIONS
( MOST CUSTOM PROJECTS ARE BILLED AT "STANDARD SHOP RATE" = $120 PER HOUR )

TJ's CUSTOM PARTS
 

TJ - SIG SAUER - STAINLESS STEEL - SHORT TRIGGERS
( AVAILABLE IN SATIN POLISHED OR BLACK STAINLESS FOR THE P220-226-228-229-245 )
ONLY $65.00 - + $5.00 S & H - USPS Uninsured or $8 Fully Insured.
(
P225 - Satin or Polished Stainless ONLY - $95.00 ) + $5.00 S & H - USPS Uninsured or $8 Fully Insured.

( P239 - Satin or Polished Stainless or Black - $95.00 ) + $5.00 S & H - USPS Uninsured or $8 Fully Insured.


TJ - SIG SAUER - STAINLESS STEEL - HEX HEAD
GRIP SCREWS
( AVAILABLE IN SILVER OR BLACK STAINLESS FOR ALL MODELS ) ( P239 SILVER )
( PLEASE SPECIFY MODEL AND COLOR WHEN ORDERING )
ONLY $15.00 ( PER SET )
( INCLUDES ALLEN WRENCH ) + $4.00 S&H   USPS Uninsured or $8 Fully Insured.


* Custom High Polished or Satin Polished Stainless Screws $25.00 ( SET OF 4 ) ( +S/H )


LIMITED TIME ONLY - Sig P239 BLACK STAINLESS Screws $18.00 (Per Set) ( +S/H )


Sig Sauer Mosquito Grip Screws - Stainless or Black (Black = non-stainless) $15.00 (Per Set (4)) ( +S/H )
( These screws require either a 2mm or 5/64" Allen Hex key not provided )


TJ TRI-MAG TRIPLE CHAMBER COMPENSATORS FOR 1911

( AVAILABLE IN .45 - 9mm / 38 SUPER ) ( 3 PROGRESSIVE TOP PORTS + 2 SIDE PORTS )
ONLY $275.00 ( WHITE - CARBON STEEL ) + $9.95 S&H

OR $375.00 ( STAINLESS STEEL ) + $9.95 S&H


TJ "SIG-COMP" DOUBLE CHAMBER
STAINLESS COMPENSATORS FOR ALL SIG PISTOLS

( AVAILABLE IN .45 - .40 - .357SIG / 9mm / 38 SUPER )
((( NOTE: YOU WILL NEED AN EXTENDED THREADED BARREL TO INSTALL )))

$395.00 ( STAINLESS STEEL ) + $9.95 S&H


TJ BERETTA TRI-MAG TRIPLE CHAMBER COMPENSATORS

( 3 PROGRESSIVE TOP PORTS + 2 SIDE PORTS )
( AVAILABLE IN 9mm ) ( .40 AVAILABLE ON SPECIAL ORDER BASIS +$50 )
((( NOTE: YOU WILL NEED TO THREAD YOUR BARREL TO INSTALL )))
ONLY $495.00 ( STAINLESS STEEL ) + $9.95 S&H

TJ SERIES 2 - HIGH GRIP / DROP IN
STAINLESS BEAVERTAIL GRIP SAFETIES

$100 +$8s/h

DROP IN WITH LITTLE OR NO FITTING ON ALL COLT 1911 VARIATIONS AND MOST COPIES
NO FRAME GRINDING NECESSARY (COLT AND MOST COPIES)
HIGH GRIP - HIGH SWEEP FOR POSITIVE HAND PLACEMENT AND NO "BITE"
AVAILABLE IN SATIN POLISHED STAINLESS OR BLACK STAINLESS
( *MUST USE COMMANDER STYLE HAMMER OR MODIFY SPUR HAMMER )
( *SERIES '80 NEED TANG FITTING - *FILE FIT MODIFICATION DIRECTIONS ARE INCLUDED )


TJ's - COLT SERIES '80 TO '70 CONVERSION SHIMS
TO REPLACE AND ELIMINATE COLT '80 SERIES FIRING PIN BLOCK ACTUATORS
THESE ARE THE ORIGINALS ! THESE ARE MADE FROM PRECISION GROUND STOCK !
NOW AVAILABLE IN 4 THICKNESSES: .030" / .057" (original) / .060" / .065"

ONLY $7.95
+ $1.00 EACH S&H
OR $65.00 FOR 10

+ $5.00 S&H

Misc Notes from TJ :

SORRY I DON'T HAVE FANCY COLOR BROCHURES,
NO B.S. OR HIGH PRESSURE SALES PITCHES,
NO DEALER OR P.D. DISCOUNTS [ EXCEPT TJ DEALER PART SALES ],
NO 8 MONTH - 3 YEAR "AGING" OF YOUR WEAPON,
SORRY ... I'M NOT "POLITICALLY CORRECT" - AND I DON'T WANT TO BE.
I'M NOT MUCH FOR SMALL TALK - THE WORK DOESN'T GET DONE, SORRY.
I DO NOTHING BUT STRAIGHT HONEST WORK.
I DON'T COMPROMISE MY QUALITY OR MY INTEGRITY.
IF YOU'RE LOOKING FOR A DEAL - CALL SOMEWHERE ELSE . . . . .
BUT. . . . . IF YOU WANT THE HIGHEST LEVEL OF STANDARDS AND PERSONAL ATTENTION,
I WILL GLADLY ACCEPT YOUR BUSINESS AND DO MY UTMOST TO
SERVICE YOUR WEAPON TO A LEVEL HOPEFULLY ABOVE ALL YOUR EXPECTATIONS.

TJ
 


 

REMEMBER . . .

" A JOB WORTH DOING . . . . .
                    . . . IS WORTH DOING WELL. "
 

SHIPPING ADDRESS & INSTRUCTIONS: 

RETURN UPS & INSURANCE CHARGES (PER GUN)
(Handgun Prices Below / Long Guns Cost Extra)


***@ CLICK HERE FOR SHIPPING OPTIONS & HIGH $ EXPLANATION @***


OVERNIGHT AIR SHIPPING - Standard box size $115
(Fedex or UPS of my selection) (Basic insurance included)

OVERNIGHT AIR SHIPPING - Oversize box size $145
(Fedex or UPS of my selection) (Basic insurance included)

CALIFORNIA DISCOUNT OVERNIGHT SHIPPING - Standard box size $95
(Fedex or UPS of my selection) (Basic insurance included)

2 Day Air - ** UNINSURED $59

GROUND - ** UNINSURED $39

*Extra $1000 - $1500 Insurance = $10

*Extra $1500 - $2500 Insurance = $18

*Extra $2500 - $3500 Insurance = $25

Hawaii or Alaska SHIPPING UPCHARGE $35.00

*** I AM willing to ship on YOUR UPS or FEDEX account
PRIORITY OVERNIGHT SHIPPING ONLY - FULLY INSURED ONLY
You MUST supply me a pre-filled shipping ship with your account# & information
(I need two copies, one copy for shipping & one copy for my shipping records)
$15 Service fee to cover my pick-up & packing

* You may request insurance amount $ from me by what your think you gun, parts, & custom work will cost to REPLACE.

** If I ship OTHER then PRIORITY OVERNIGHT SHIPPING I will ship your gun in PARTS (not an assembled gun) and it will be up to you to ENSURE that any loss or damage claim will be named & labled as PARTS ONLY = NO FRAME/RECEIVER or they will NOT PAY ANY INSURANCE! (READ Bottom 1/2 of this link)
I will do my part, but YOU will ultimately be responsible and have to do your part, together maybe we can stop UPS from taking advantage of us all.


IF YOU WANT EXTRA $$$ INSURANCE PLEASE INCLUDE EXTRA $$$

((( PLEASE NOTE THIS RIPOFF SHIPPING FEES ARE FROM UPS, NOT ME! )))
( FIXED UPS AVERAGE ESTIMATES BASED ON 6LBS - $1500 INSURANCE - RESIDENTIAL DELIVERY - ADULT SIGN)
 

IN CONTRACTING ANY WORK, YOU AGREE TO MY   FULL DISCLAIMER DISCLOSURE .
 

SORRY NO CHECKS ACCEPTED - NO EXCEPTIONS
SEND CASH/BANK CHECK, MONEY ORDER, OR CASH WITH YOUR GUN.

*  RUSH ORDERS BY APPOINTMENT ONLY  *
 

PLEASE READ MY  CONTACT POLICIES WEB PAGE
FOR PHONE CALLS AND LOCAL CUSTOMER APPOINTMENTS

*  This address is for Shipping ONLY - NO Drop Off's or visitors  ! *
MY SHOP IS CLOSED TO THE PUBLIC
 

UPS or FEDEX GUNS WITH PAYMENT TO:
  * Shipping Directions Click Here *

TJ's Custom Gunworks
3347 Caroline Ave.
Culver City, CA, 90232, USA

* Shipping Legalities & Restrictions Click Here *

Click here to E-Mail TJ (PLEASE keep all Questions as BRIEF as possible)
 

Return to TJ's Custom Gunworks Home Page