TJ's Custom Gunworks Printable Price Selector
( JANUARY 2008 )

Check All Boxes Of Work You Desire
Then Click "FINISH WORK ORDER"

(This is NOT a Commitment To The Work, Only an ESTIMATE.)


 
After Reviewing The Resulting "Work Order Request" Pop-Up Page,
Please PRINT it and Send it with Gun(s) and Money.
Or Mail / Email me your "Work Order Request" to Verify Selected Prices.
When Received, I Will Email You Conformation of Prices or Corrections Needed.

*** CLICK HERE IF YOU PREFER MY OLD PRICE LIST FORMAT ***

TJ OFFERS MANY OTHER CUSTOM SERVICES INCLUDING:
SUPER EXTENDED SAFETIES & SLIDE CATCHES MADE TO ORDER

COMPLETE MATCH - IPSC - PPC - PIN - & PLATE GUNS
BUILT TO YOUR SPECIFICATIONS
( MOST CUSTOM PROJECTS ARE BILLED AT "STANDARD SHOP RATE" = $100 PER HOUR)
( + PARTS & MATERIALS )

***** WORK PACKAGES *****

SIG SAUER: LEVEL ONE DELUXE $395
INCLUDES: A FULL DELUXE ACTION & TRIGGER JOB, SMOOTHING OUT ALL THE INTERNALS AS WELL AS THE SLIDE & BARREL FUNCTIONING, A TJ SHORT STAINLESS TRIGGER ( OR ROUND & POLISH STOCK TRIGGER ON MODELS THAT TJ TRIGGER IS NOT AVAILABLE FOR ) THROAT & POLISH THE BARREL AND FEED RAMP TO ENHANCE FEEDING RELIABILITY
+ FIT & POLISH THE EXTRACTOR TO ENHANCE CASE EXTRACTION AND HELP
PREVENT EXTRACTOR BREAKAGE.

( SIG P225 & P230/P232 ADD + $20 )
( ADD CUSTOM MAINSPRING + $15 )


**********************************************************************************

SIG SAUER: LEVEL TWO - W/BLACK TEFLON PLATING ( INCLUDES LEVEL ONE ) $745
 SIG SAUER: LEVEL TWO - W/HARD CHROME OR NICKEL PLATING ( INCLUDES LEVEL ONE ) $845
PLUS: INSTALL MEPROLIGHT TRITIUM NIGHT SIGHTS WITH "ORANGE GLO" FRONT SIGHT, AND PLATE SLIDE AND SMALL PARTS IN YOUR CHOICE OF:
NICKEL, HARD CHROME OR MATTE BLACK TEFLON

( OLD MODEL SIG P220 WITH INTEGRAL FRONT SIGHT + $95 )


**********************************************************************************

SIG SAUER: LEVEL THREE - W/BLACK TEFLON PLATING ( INCLUDES LEVELS ONE & TWO ) $1295
 SIG SAUER: LEVEL THREE - W/HARD CHROME OR NICKEL PLATING ( INCLUDES LEVELS ONE & TWO ) $1395
PLUS: BOB OR SEMI-BOB HAMMER, INSTALL A SET OF TJ STAINLESS GRIP SCREWS, AND INSTALL A "TJ SIG-SAFE" SAFETY DEVICE ( WEAPON RETENTION AND TRIGGER LOCKING SAFETY.)
( SIG-SAFE AVAILABLE ON 226-228-229-220-245-239 )

(OLD MODEL SIG P220 ADD + $95 )


**********************************************************************************

COLT 1911: LEVEL ONE *** RELIABILITY PACKAGE *** $195
INCLUDES: THROAT & POLISH THE BARREL AND FEED RAMP TO ENSURE FEEDING RELIABILITY, FIT & POLISH THE EXTRACTOR (RECUT HOOK - ADJUST TENSION - BEVEL & POLISH FACE TO HELP PREVENT BREAKAGE), A CUSTOM EXTENDED AND ANGLED EJECTOR, MILLING THE EJECTION PORT LOWER TO ALLOW SPENT CASES TO EXIT UNRESTRICTED, SMOOTH BREECH FACE, AND CHECK ALL FUNCTIONING RELIABILITY.


**********************************************************************************

COLT 1911: LEVEL TWO ( INCLUDES LEVEL ONE PACKAGE ) $725
PLUS: A FULL DELUXE ACTION & TRIGGER JOB, A CUSTOM MATCH COMMANDER HAMMER
( MODIFIED ED BROWN ), A CUSTOM 3 HOLE ALUMINUM MATCH TRIGGER, AND A TJ SERIES TWO HIGH RIDE STAINLESS BEAVERTAIL GRIP SAFETY.


**********************************************************************************

COLT 1911: LEVEL THREE ( INCLUDES LEVEL ONE & TWO ) $995
PLUS: A PACHMAYR FLAT MAINSPRING HOUSING, A FULL LENGTH GUIDE ROD ASSEMBLY, CUT FRAME AND INSTALL A STANDARD WILSON BEAVERTAIL GRIP SAFETY, AND INSTALL MILLETT ADJUSTABLE TARGET SIGHTS
( WHITE OUTLINE REAR SIGHT WITH A .312 ORANGE BAR FRONT )
( SUBSTITUTE UPGRADES ARE AVAILABLE )


**********************************************************************************

COLT 1911: LEVEL FOUR ( INCLUDES LEVELS 1 + 2 + 3 ) $1325
PLUS: INSTALL A WILSON / SWENSON AMBI THUMB SAFETY, A EXTENDED SLIDE CATCH, A CHECKERED EXTENDED MAGAZINE RELEASE, BEVEL THE FRAME MAGAZINE WELL, AND A PAIR OF EXOTIC WOOD GRIPS ( MY CHOICE )


**********************************************************************************

COLT 1911: LEVEL FIVE "FULL MATCH" ( INCLUDES LEVELS 1 + 2 + 3 + 4 ) $2895
PLUS: INSTALLATION OF A CUSTOM MATCH BARREL FITTED WITH A TJ TRI-MAG TRIPLE CHAMBER FULL PROFILE COMPENSATOR, AN S&A EXTENDED MAGAZINE WELL, STIPPLE THE TRIGGER GUARD AND FRAME FRONT STRAP, EXTRA SMOOTHING THROUGHOUT THE ACTION WORKS, AND A FULL MATTE TEFLON COATING OVER THE ENTIRE GUN.


**********************************************************************************

REVOLVER: LEVEL ONE $275
INCLUDES: A FULL DELUXE ACTION JOB WITH INTERNAL FRAME POLISH,
ROUND - RADIUS - & POLISH THE TRIGGER TO ENHANCE THE D.A. PULL,
AND "ORANGE, GREEN, YELLOW, OR RED DAYGLO" HIGHLIGHTING ON THE FRONT SIGHT.

RUGER DOUBLE ACTION OR DAN WESSON REVOLVERS ADD + $20


**********************************************************************************
REVOLVER: LEVEL TWO ( INCLUDES LEVEL ONE ) $485


PLUS: TIME THE ACTION MECHANISM, BOB & REVERSE CUT THE HAMMER, INSTALL A FIXED EXTERNAL TRIGGER STOP TO CRISP UP THE PULL AND REMOVE ANY OVERTRAVEL, AND INSTALL A PAIR OF HOUGE RUBBER GRIPS.
RUGER DOUBLE ACTION OR DAN WESSON REVOLVERS ADD + $20

SIG SAUER PRICE LIST:

( MOST PRICES ARE APPLICABLE FOR: BERETTA - S&W - RUGER & TAURUS SEMI AUTOS )
(NOTE: Sig P245 prices are the same as the P220, and Sig P232 are the same as the P230)

DELUXE ACTION JOB - MATCH QUALITY WORK ( SEE NOTES BELOW ) ................................. $295
( INCLUDES ALL TRIGGER AND ACTION WORK & + SMOOTHING INSIDE SLIDE FOR FUNCTIONAL RELIABILITY )

ADD CUSTOM MAINSPRING ..............................................................................................................  + $15

ACTION JOB ON D.A. AUTOS OTHER THAN THOSE SPECIFIED ABOVE .......................... $175 - $350

TRIGGER: ROUND - RADIUS - POLISH ( FOR IMPROVED D.A. FEEL & PULL THROUGH )...... $85

TJ STAINLESS SHORT TRIGGER ............................................................................................................. $65
( AVAILABLE IN SATIN POLISHED OR BLACK STAINLESS) ( 220-226-228-229-245 )

TJ STAINLESS SHORT TRIGGER ( FOR 225 - POLISHED STAINLESS ONLY ) .......................................................... $95

THROAT & POLISH BARREL AND FEED RAMP ................................................................................... $55
( CONTOUR & MIRROR POLISH FOR EXTRA FEEDING RELIABILITY )

THROAT & POLISH BARREL AND FEED RAMP ON SIG 230/232 OR WALTHER PPK ................... $75

FIT & POLISH EXTRACTOR ( CUT HOOK - POLISH FACE - BEVEL EDGES - ADJ. TENSION ) ( HELPS AGAINST BREAKAGE ) ... $25

HAMMER: BOB OFF SPUR (FULL) ( FOR QUICK NON SNAG DRAWING AND LIABILITY ) ( MANDITORY D.A. FIRST SHOT ) ..... $75

HAMMER:"SEMI-BOB" (ROUND OFF EDGES - BEVEL FROM REAR FOR DRAW-CUT ONE WAY SERRATIONS - POLISH ) .........$125

TJ's "SIG-SAFE" TRIGGER BLOCKING PUSH BUTTON SAFETY ( DISCRETE WEAPON RETENTION SAFETY DEVICE ) ......$495
( "SIG-SAFE "LIABILITY WAIVER MUST BE SIGNED PRIOR TO INSTALLATION ) (AVAILABLE FOR 226,228,229,220,245,239)

SATIN POLISH BARREL ( REMOVE BLUING AND SATIN FINISH ALL 7 ANGLES VIEWED THROUGH EJECTION PORT ) .......... $25

HIGH POLISH BARREL ( POLISH ALL 7 ANGLES VIEWED THROUGH EJECTION PORT ) ( SMOOTHS SLIDE FUNCTION ) $35

JEWELL BARREL 3 SIDES ( 7 ANGLES - INCLUDES PRE-POLISHING THE BARREL ) ................ $95

JEWELL TOP OF BARREL ONLY ( HIDES SCRATCHES / GALLING ) ( SIDES LEFT BLUE ) ............................... $45

JEWELL EXTRACTOR ( STAINLESS SLIDE MODEL GUNS ONLY ) ................................................................... $15

POLISH BARREL TIP .................................................................................................................................... $10

POLISH GUIDE ROD TIP ................................................................................................................................ $5

TJ STAINLESS STEEL GRIP SCREWS ( FOR SIG SAUER PISTOLS - AVAILABLE IN SILVER OR BLACK STAINLESS ) ...... $12

TJ STAINLESS STEEL GRIP SCREWS ( EXTRA SET - STANDEARD SILVER OR BLACK STAINLESS ) ......................... $12

TJ STAINLESS STEEL GRIP SCREWS WITH A CUSTOM SATIN POLISH FINISH ...........................$20

TJ STAINLESS STEEL GRIP SCREWS WITH A CUSTOM HIGH POLISH FINISH ............................$20

TJ STAINLESS STEEL GRIP SCREWS FOR SIG P239 IN BLACK STAINLESS  .................................$15

REMOVE TRIGGER GUARD HOOK ( TANG ) ( + REFINISHING CHARGES ) ................................. $65

"ASP" RELIEVE CUT TRIGGER GUARD ................................................................................................$150
( FOR QUICKER FINGER ACCESS - ESPECIALLY WITH GLOVES ) (+REFINISHING)

STIPPLE OR SERRATE ( HORIZONTAL ) TRIGGER GUARD ( + REFINISHING CHARGES ) ....... $75

STIPPLE OR SERRATE ( HORIZONTAL ) FRONT STRAP ( + REFINISHING CHARGES ) .......... $150

SUPER GRIT-GRIP TAPE ON FRONT STRAP  ......................................................................................... $35
( FOR A GOOD POSITIVE GRIP-HOLD ON YOUR GUN AT A FRACTION OF THE PRICE OF CHECKERING OR STIPPLING )

MELT JOB (POLISH & DE-BURR SHARP EDGES & CORNERS) ( + REFINISHING CHARGES ) ... $95 - $150

60% PLATING - MATTE BLACK TEFLON ( SLIDE AND ALL EXTERNAL SMALL PARTS ) .....................................$195

60% PLATING - HARD CHROME OR NICKEL ( SLIDE AND ALL EXTERNAL SMALL PARTS ) ...............................$295

MATTE BLACK TEFLONENTIRE PISTOL ( COMPLETE EXTERNAL PROTECTION AGAINST CORROSION & GLARE ) .............$325

NICKEL PLATE ENTIRE PISTOL (MATTE - BRUSHED SATIN - ) ( RECOMMEND MATTE TEXTURE ON FRAME) $450
( HIGH GLOSS POLISHED ADD +$25 )

HARD CHROME ENTIRE PISTOL ( MATTE - BRUSHED SATIN ) ( MATT FINISH ON FRAME ONLY ) ... $450

( HIGH GLOSS POLISHED ADD +$25 )

24K PLATING ON SLIDE AND SMALL PARTS ( HIGH GLOSS ) ( FOR SHOW NOT CONSTANT WEAR) $495

CUSTOM MARBLE ANODIZING ON FRAME * ( YOUR COLOR(S) WITH CONTRASTING MARBLE SWIRLING ) ..... $399

CUSTOM MARBLE DELUXE ANODIZING ON FRAME WITH PRE-POLISH ................................ $499
( YOUR COLOR(S) WITH SWIRLING ) ( PRE-POLISH ADDS A SHINE TO THE COLORS AND BRINGS THEM ALIVE BETTER )

CUSTOM  ANODIZING ON FRAME * ( ANY ONE SINGLE COLOR or BLACK) ............................ $250

SIG P229 ½ SLIDE POLISH ( POLISH SLIDE FACE - LEAVE REMAINDER OF SLIDE BLACK FOR TWO TONE EFFECT ) ........... $250

TJ "SIG-COMP" 2 PORT COMPENSATOR INSTALLED ON YOUR EXTENDED BARREL ........... $695
( INCLUDES COMPENSATOR (PART), THREADING OF YOUR EXISTING BARREL, & COMPENSATOR FITTING )

FIT - INSTALL BARSTO BARREL + REMOVE MACHINE / TOOL MARKS & BLEMS ......... $100-$150
( YOU SUPPLY BARREL )

TJ "BERETTA TRI-MAG" 5 PORT COMPENSATOR INSTALLED (FACTORY BARREL IS OK)   $795
( INCLUDES COMPENSATOR (PART), THREADING OF YOUR BARREL, & COMPENSATOR FITTING )

SIG P229 POLISH ENTIRE SLIDE HIGH GLOSS ( WILL BLUR LETTERING AND SMOOTH SERRATIONS ) $250

SLIDE CATCH OR DECOCKER - HEAT* & BEND   (SPECIFY WHICH YOU WANT OR BOTH x2 $)   $85
( WILL ASSIST IN EASE OF OPERATION AND RELEASE OF SLIDE WHEN LOCKED BACK ) 
( *SLIGHTLY DISCOLORS THE STEEL / REFINISHING IS EXTRA $ )

TRITIUM NIGHT SIGHTS ( MEPROLIGHT - TJ'S PREFERRED CHOICE ) (225-226-228-229-239-245-NEWER 220)   $155

TRITIUM NIGHT SIGHTS ( I.W.I. 2 COLOR OR BAR DOT - OR TRIJICON 3 DOT ) ( 225-226-228-229-239-NEWER 220) ... $175

ADJUSTABLE NIGHT SIGHTS FOR SIG SAUER
( TRIJICON = $350 )
( MMC = $225 )
( MEPROLIGHT = $250 )

( *** ALL SIGHT PRICES INCLUDE PARTS & LABOR *** )
TRITIUM NIGHT SIGHTS FOR OLD MODEL P220 OR P230 ( THREE DOTS OR BAR-DOT ) ............ $250-$275

MILLETT ADJUSTABLE TARGET SIGHTS ( 225-226-228-229-239-245-NEWER 220) ............................... $135

MILLETT ADJUSTABLE TARGET SIGHTS FOR OLD MODEL P220 ............................................... $195

DAYGLO - "ORANGE GLO" OR "GREEN GLO" HIGHLIGHT ON ANY FRONT SIGHT ............... $15

SIGHTING IN PISTOLS ................................................................. ( I SUPPLY THE AMMO ) ................ $65

SIGHTING IN PISTOLS ............................................................ ( YOU SUPPLY THE AMMO ) .............. $45

GUN CLEANING  - FULL DETAILED CLEANING & INSPECTION .................................................... $95

MINIMUM GUN CLEANING CHARGE ( BASIC / QUICK CLEANING & OIL )................................. $35

( GUN WILL BE RETURNED AS YOU LEFT IT UNLESS YOU ORDER IT CLEANED )

ALL MY ACTION JOBS INCLUDE :
  • SMOOTH OUT & LIGHTEN DOUBLE ACTION PULL 25% - 40% ( DEPENDING ON GUN )
  • SMOOTH & LIGHTEN SINGLE ACTION TAKE UP + CRISP UP LET OFF "BREAK"

    • ( NORMAL 3 - 3 1/2 LBS IF NOT SPECIFIED)
  • DEBURR & SMOOTH OUT BARREL AND SLIDE FOR IMPROVED FUNCTION RELIABILITY
  • CONTOUR & MIRROR POLISH ALL INTERNAL ACTION & FUNCTION CONTACT PARTS
  • SHORTEN MAINSPRING TO TUNE D.A. PULL

    • ( UNLESS SPECIFICALLY REQUESTED NOT TO )
  • CHECK GENERAL CONDITION OF ALL INTERNAL PARTS AND THEIR FUNCTION
  • PRIMER TEST GUN FOR DETONATION RELIABILITY


WORK TURNAROUND TIME ( IN SHOP DOWN TIME )
SIG LEVEL ONE OR SIMILAR WORK / COLT LEVEL TWO / MATTE TEFLON : 2-4 WEEKS
SIG LEVEL TWO / NICKEL PLATING / HARD CHROME : 6 - 12 WEEKS

RUSH SERVICE IS AVAILABLE!
ONE WEEK TURNAROUND: $100.00 EXTRA ( + SHIPPING CHARGES )

24 HOUR OVERNIGHT TURNAROUND: $300.00 EXTRA ( + SHIPPING CHARGES )


$ PER GUN / NOT AVAILABLE ON NICKEL / HARD CHROME & CERTAIN OTHER JOBS
*** YOU MUST CALL OR EMAIL AHEAD TO SCHEDULE RUSH JOBS ***

Colt 1911 and copies :

TRIGGER JOB ONLY = ( CUT THE HAMMER / SEAR  ONLY ).......................................................... $175
( BASICALLY WHAT MOST "OTHER GUNSMITHS" CALL AN ACTION JOB )

COMPLETE ACTION AND MATCH TRIGGER JOB ................................................................$295
( INCLUDES EXTRA SMOOTHING & POLISHING IN SLIDE ETC. )
***  INCLUDES REWORKING AND POLISHING ALL INTERNAL FUNCTION PARTS AS WELL AS SMOOTHING SLIDE / BARREL FUNCTION  ***

SERIES '80 TO '70 CONVERSION SHIM ( TO REPLACE FIRING PIN BLOCK ACTUATORS - MATCH GUNS ) .... $5

CUSTOM MATCH ALUMINUM TRIGGER INSTALLED * ( PART & LABOR ) ......................................... $75
***** ( INCLUDES REMOVING BOTH FORE & AFT TRAVEL AND SLOP ) *****

CUSTOM MATCH ALUMINUM TRIGGER INSTALLED ON GOLD CUP OR PARA ORD ........ $95-$125

CUSTOM MATCH COMMANDER HAMMER INSTALLED ( INCLUDES PREP WORK ) .............. $95

CUT ONE WAY SERRATIONS OR CHECKER HAMMER ( FOR EASIER COCKING ) ( LABOR ) $65

THROAT & POLISH BARREL AND FEED RAMP * ............................................................................ $55
* ( CONTOUR / ANGLE / MIRROR POLISH TO ASSURE FEEDING RELIABILITY )

FIT & POLISH EXTRACTOR* ..................................................................................................................... $25
* ( RECUT HOOK - ADJUST TENSION - BEVEL - POLISH FACE TO HELP PREVENT BREAKAGE )

INSTALL CUSTOM EXTENDED EJECTOR ( INCLUDES FITTING & ANGLE OF THROUGH ADJUSTMENT ) ... $45

MILL EJECTION PORT LOWER TO ALLOW UNRESTRICTED EJECTION ...................................... $85

SATIN POLISH BARREL ( REMOVE BLUING AND SATIN FINISH SECTION VIEWED THROUGH EJECTION PORT ) ................ $25

HIGH POLISH BARREL ( POLISH SECTION VIEWED THROUGH EJECTION PORT ) ( SMOOTHS SLIDE FUNCTION ) ....... $35

JEWELL BARREL  ( INCLUDES PRE-POLISHING THE BARREL {ABOVE} ) .................................. $95

EXTENDED BEAVERTAIL GRIP SAFETY ( PART ) ....................................................................... $35 - $65

{ BEAVERTAIL FITTING (LABOR TO FIT LOCKING TANG ) .................................................... $10 - $25

{ CUT AND SHAPE FRAME ( FOR INSTALLATION OF WILSON / CLARK / BROWN BEAVERTAILS )   $100 - $185

TJ SERIES TWO HIGH RIDE BEAVERTAIL GRIP SAFETY INSTALLED ( PARTS & LABOR ) ....................................$75

CHECKER MAGAZINE RELEASE ( LABOR ) ........................................................................................... $25

INSTALL EXTENDED CHECKERED MAGAZINE RELEASE ( PARTS & LABOR ) ........................... $40

CHECKER TRIGGER GUARD ( FRONT ) ....................( + REFINISHING CHARGES ) .....................$250

STIPPLE OR SERRATE ( HORIZONTAL ) TRIGGER GUARD ( + REFINISHING CHARGES ) ...... $75

STIPPLE OR SERRATE ( HORIZONTAL ) FRONT STRAP ( + REFINISHING CHARGES ) ............$150

SUPER GRIT-GRIP TAPE ON FRONT STRAP  ......................................................................................... $35
( FOR A GOOD POSITIVE GRIP-HOLD ON YOUR GUN AT A FRACTION OF THE PRICE OF CHECKERING OR STIPPLING )

{ COMPENSATORS ( PARTS ) ( 9mm / .45 / .38 SUPER ) ............................................................. $95 - $400

{  CUSTOM MADE COMPENSATORS ( PARTS ) ( 9mm / .45 / .38 SUPER ) .......................... $300 - $1500

{ COMPENSATOR FITTING & INSTALLATION ( LABOR ) ( + REFINISHING CHARGES ) $75 - $250

{ CUT THREADS ON BARREL FOR COMPENSATORS ..........................................................................$135

{ MATCH BARRELS ( PARTS ) ....................................................................................................... $195 - $295

{ MATCH BARREL FITTING & INSTALLATION ...................................................................... .. $50 - $250

TJ TRI-MAG COMPENSATOR& MATCH BARREL INSTALL ........................................................... $895
( INCLUDES ALL PARTS & LABOR EXCEPT REFINISHING)
( STAINLESS STEEL COMP ...................................................ADD $100 )

FULL LENGTH RECOIL GUIDE ROD & BUFFER INSTALLED .................................................. $45 - $85

EXTENDED OR AMBI SAFETY INSTALLED ( PARTS & LABOR ) .......................................... $65 - $175

EXTENDED SLIDE CATCH INSTALLED ( PARTS & LABOR ) .................................................... $40 - $75

FLAT AND / OR CHECKERED MAINSPRING HOUSING INSTALLED ...................................... $30 - $85

BEVEL MAGAZINE WELL ( LABOR ) ............................................................................................... $45 - $95

S & A MAGAZINE WELL INSTALLED ( DOES NOT INCLUDE BEVELING FRAME WELL OR MODIFYING PART ) ........... $95

MELT JOB (POLISH & DE-BURR SHARP EDGES & CORNERS) ( + REFINISHING CHARGES )   $85 - $150

BOMAR OR MILLETT LOW PROFILE SIGHTS MILLED AND INSTALLED ( PARTS & LABOR )   $395

MILLETT ADJUSTABLE SIGHTS INSTALLED (WHITE OUTLINE REAR & .312 ORANGE FRONT ) ........ $135 - $185

MILLETT ADJUSTABLE SIGHTS FOR OTHER PISTOLS ........................................................ $95 - $250

TRITIUM NIGHT SIGHTS ( STAKE-ON COLT 1911 ) ( NON ADJUSTABLE ) ................................. $195

TRITIUM NIGHT SIGHTS - MILL CUT DOVETAIL FOR FRONT SIGHT ( NON ADJUSTABLE ) $250

TRITIUM NIGHT SIGHTS FOR OTHER PISTOLS     ( FIXED OR ADJUSTABLE - VARIOUS BRANDS )     $135 - $350

ACRYLIC SIGHT INSERTS INSTALLED IN ANY FRONT SIGHT ( "RED RAMP" OR ANY COLOR ) ...... $65

"ORANGE, GREEN OR RED GLO" HIGHLIGHT INSTALLED ON ANY SIGHT ( FLORESCENT DAY GLOW ) ..... $15

GRIP INLAYS RECESSED INTO YOUR GRIPS ( LABOR ONLY - PER SIDE) .......................... $35 - $95
( CHARMS / PINS / EARINGS / MINI BADGES / OR ANYTHING FLAT! )

SIGHTING IN PISTOLS ................................................................. ( I SUPPLY THE AMMO ) ................ $65

SIGHTING IN PISTOLS ............................................................ ( YOU SUPPLY THE AMMO ) .............. $45

GUN CLEANING  - FULL DETAILED CLEANING & INSPECTION .................................................... $95

MINIMUM GUN CLEANING CHARGE ( BASIC / QUICK CLEANING & OIL )................................. $35
( YOUR GUN WILL BE RETURNED AS YOU LEFT IT UNLESS YOU ORDER IT CLEANED )

REVOLVER:


DELUXE ACTION JOB WITH COMPLETE INTERNAL FRAME POLISH ..........................................$195
( INCLUDES EXTRA SMOOTHING,  POLISHING & TUNING )

BASIC ACTION JOB ( LIGHTEN & REDUCE TRIGGER PULL ) ......................................................... $150

P.D. DUTY ACTION JOB ( SMOOTH & REDUCE D.A. PULL YET RETAIN 3 LB + SINGLE ACTION AS PER REGS ) $225

TIME ACTION ( ELIMINATE TWO STAGE LOCKING AFFECT ON S&W REVOLVERS ) ......... + $20

RUGER DOUBLE ACTION OR DAN WESSON REVOLVERS ................................................ ADD + $20

ROUND / RADIUS / AND POLISH TRIGGER ............................................................................... $65 - $95
( IMPROVES DOUBLE ACTION FEEL & STROKE TO "ROLL WITH THE PULL" )

SKIN & POLISH HAMMER ......................................................................................................................... $95

BOB OFF HAMMER SPUR ( FOR NON - SNAG DRAWS & LIABILITY )   ( MAKES GUN D.A. ONLY ON FIRST SHOT )   $65

BOB OFF HAMMER SPUR AND REVERSE CUT ( MORE COSMETIC - FLOWS WITH FRAME CONTOUR ) $95

INSTALL FIXED EXTERNAL TRIGGER STOP ON TRIGGER GUARD .............................................. $95
( ELIMINATES OVER TRAVEL AND CRISPS UP PULL )

INSTALL SIGHT RIBS AND / OR SCOPE BASES ( + PARTS ) .................................................. $85 - $250
( DRILL / TAP / AND INSTALLATION LABOR ONLY)

REVOLVER BULL BARRELS AND / OR COMPENSATORS INSTALLED .................................... P.O.R.

ROUND BUTT CONVERSION ON SQUARE BUTT FRAME ( GRIPS & REFINISHING NOT INCLUDED ) $125

TJ ELECTROPORTING( LIKE MAGNAPORTING EXCEPT HAS DETAILED LIGHTNING BOLT SHAPE ) ... $300 - $550

BARREL PORTING  ( SERIES OF ROUND EXHAUST PORTS TO COMPENSATE MUZZLE RISE ) .............. $250 - $400

RIFLE:
TRIGGER JOB ( LIGHTEN & CRISP UP TRIGGER PULL ) ...................................................... $150 - $300

RIFLE ACTION & TRIGGER JOB ( SMOOTH OUT BOLT ACTION + TRIGGER JOB ) ..... $175 - $375

SEMI AUTO RIFLE TRIGGER JOB ( LIGHTEN TRIGGER PULL ) ......................................... $175 - $350

SEMI AUTO RIFLE ACTION & TRIGGER JOB ( SMOOTH OUT MECHANISM + TRIGGER JOB ) ... $200 - $500

RIFLE OR SEMI AUTO - THROAT & POLISH FEED RAMP ( AS MUCH AS POSSIBLE / ACCESSIBLE )   $85


 

CUSTOM FINISH ALTERATIONS

( PRICES SHOWN ARE FOR HANDGUNS ) ( PLEASE READ NOTATIONS )
HIGH POLISH STAINLESS STEEL GUNS .................................................................................... $175 - $395

HIGH POLISH STAINLESS STEEL SLIDE ( NOTE: LETTERING MAY BE BLURRED OR FADED FROM BUFFING ) ......... $250

REBLUEING - STANDARD COMMERCIAL GRADE ........................................................................... $250

DEEP HIGH GLOSS REBLUEING ( SUPER DELUXE GRADE ) .................................................. $295-$395
( SIMILAR TO PYTHON OR GOLDCUP BLUEING )

MATTE BLACK TEFLON PLATING ( FLAT POROUS BLACK ANTI-CORROSION FINISH ) .............. $195 - $350

MATTE BLACK TEFLON ON SLIDE ONLY ................................................................................................... $125

MATTE BLACK TEFLON ON FRAME ONLY ............................................................................................... $150
( EXCELLENT FINISH FOR HIDING RUST PITTING OR SCRATCHES OR TO COVER UP WORN OUT GUNS )
( 100% NON REFLECTIVE - 100% NON CORROSIVE EXTERNAL FINISH )

NICKEL PLATING ( MATTE - BRUSHED SATIN - OR HIGH GLOSS ) ................................... $275 - $495

HARD CHROME ( STAINLESS STEEL PLATING ) ( MATTE - BRUSHED SATIN - OR POLISHED ) .. $275 - $495

½ GUN PLATED ( ANY FINISH ) ..................................................................................................... $145 - $295

TWO TONE PLATING ................................................................................................................................ + $25

24K GOLD PLATING ON SLIDE OR FRAME .............................................................................. $350 - $550

24K GOLD / ANTIQUE GOLD / OR ANTIQUE SILVER PLATING ON SMALL PARTS ( EACH ) $55 - $95

GOLD OR SILVER FILL IN LETTERING ......................................................................................... $15 - $75
( QUALITY OF FILLING DEPENDS ON DEPTH OF LETTERING AND POROSITY OF FINISH )

PLEASE NOTE ON PLATING & REFINISHING:
MY REFINISHING PRICES MAY INITIALLY APPEAR HIGHER THAN SOME OF MY COMPETITORS, THIS IS BECAUSE MY PLATING PRICES ALSO INCLUDE METAL PREPARATION BOTH BEFORE AND AFTER THE ACTUAL PLATING. THIS IS THE ONLY WAY TO ASSURE THAT ANY UNWANTED POROSITY WILL BE ELIMINATED AND THUS NOT AFFECT THE FUNCTION PARTS. MY PLATING PRICES ALSO INCLUDE CLEANING UP AND INSPECTING ALL INTERNAL PARTS AS WELL AS PROPERLY FITTING PARTS AFTER PLATING, NOT JUST SLOPPING EVERYTHING BACK TOGETHER.
ASK MY COMPETITORS IF THEY DO ALL THIS . . . THEN COMPARE PRICING.
 

CUSTOM JEWELLING ( DIAMOND POLISHING )

AUTO PISTOL BARREL ..................................................................................................................... $75-$125

HAMMER OR TRIGGER( AFTER POLISHING + POLISHING CHARGES IF APPLICABLE ) $25-$35

REVOLVER 85% JEWELL & POLISH ( AS PICTURED ON BUSINESS CARD ) ............................. $595
( JEWELL FRAME FACE + POLISH CYL - BARREL - UNDER FRAME - MOST SMALL PARTS ) ( * HAMMER & TRIGGER EXTRA )
REMOVE SCRATCHES OR MACHINE MARKS - UPCHARGES ................................................ $15-$150


 
 

*** REFINISHING NOTE :
REMOVING CASTING PITS - FACTORY MACHINE MARKS - METAL GRAINING - DEEP SCRATCHES OR DEEP RUST PITTING COST EXTRA AND WILL NOT BE REMOVED UNLESS REQUESTED PRIOR TO STARTING WORK
 
 

TJ OFFERS MANY OTHER CUSTOM SERVICES INCLUDING:
CUSTOM FRAME CUTDOWNS FOR SPECIAL CARRY APPLICATIONS
CUSTOM FINGER GROOVE ADDITIONS WELDED ON TO FRAME
SUPER EXTENDED SAFETIES & SLIDE CATCHES MADE TO ORDER

COMPLETE MATCH - IPSC - PPC - PIN - & PLATE GUNS
BUILT TO YOUR SPECIFICATIONS
( MOST CUSTOM PROJECTS ARE BILLED AT "STANDARD SHOP RATE" = $100 PER HOUR )

TJ's CUSTOM PARTS
 

TJ - SIG SAUER - STAINLESS STEEL - SHORT TRIGGERS
( AVAILABLE IN SATIN POLISHED OR BLACK STAINLESS FOR THE P220-226-228-229-245 )
ONLY $59.95 -
( P225 - POLISHED ONLY - $85.00 ) + $3.00 S & H - USPS Uninsured or $8 Fully Insured.


TJ - SIG SAUER - STAINLESS STEEL - HEX HEAD
GRIP SCREWS
( AVAILABLE IN SILVER OR BLACK STAINLESS FOR ALL MODELS ) ( P239 SILVER )
( PLEASE SPECIFY MODEL AND COLOR WHEN ORDERING )
ONLY $11.99 ( PER SET )
( INCLUDES ALLEN WRENCH ) + $2.00 S&H   USPS Uninsured or $8 Fully Insured.

* Custom High Polished or Satin Polished Stainless Screws $20.00 ( SET OF 4 ) ( +S/H )


LIMITED TIME ONLY - Sig P239 BLACK STAINLESS Screws $15.00 (Per Set) ( +S/H )


TJ TRI-MAG TRIPLE CHAMBER COMPENSATORS FOR 1911

( AVAILABLE IN .45 - 9mm / 38 SUPER ) ( 3 PROGRESSIVE TOP PORTS + 2 SIDE PORTS )
ONLY $175.00 ( WHITE - CARBON STEEL ) + $9.50 S&H

OR $255.00 ( STAINLESS STEEL ) + $9.50 S&H


TJ "SIG-COMP" DOUBLE CHAMBER
STAINLESS COMPENSATORS FOR ALL SIG PISTOLS

( AVAILABLE IN .45 - .40 - .357SIG / 9mm / 38 SUPER )
((( NOTE: YOU WILL NEED AN EXTENDED THREADED BARREL TO INSTALL )))
$395.00 ( STAINLESS STEEL ) + $9.50 S&H


TJ BERETTA TRI-MAG TRIPLE CHAMBER COMPENSATORS

( 3 PROGRESSIVE TOP PORTS + 2 SIDE PORTS )
( AVAILABLE IN 9mm ) ( .40 AVAILABLE ON SPECIAL ORDER BASIS )
((( NOTE: YOU WILL NEED TO THREAD YOUR BARREL TO INSTALL )))
 ONLY $495.00 ( STAINLESS STEEL ) + $9.50 S&H

TJ SERIES 2 - HIGH GRIP / DROP IN
STAINLESS BEAVERTAIL GRIP SAFETIES

ONLY $45.00 + $3.00 S&H
USPS Uninsured or $9.50 Fully Insured
DROP IN WITH LITTLE OR NO FITTING ON ALL COLT 1911 VARIATIONS AND MOST COPIES
NO FRAME GRINDING NECESSARY (COLT AND MOST COPIES)
HIGH GRIP - HIGH SWEEP FOR POSITIVE HAND PLACEMENT AND NO "BITE"
AVAILABLE IN SATIN POLISHED STAINLESS OR BLACK STAINLESS
( *MUST USE COMMANDER STYLE HAMMER OR MODIFY SPUR HAMMER )
( *SERIES '80 NEED TANG FITTING - *FILE FIT MODIFICATION DIRECTIONS ARE INCLUDED )


TJ's - COLT SERIES '80 TO '70 CONVERSION SHIMS
TO REPLACE AND ELIMINATE COLT '80 SERIES FIRING PIN BLOCK ACTUATORS
THESE ARE THE ORIGINALS ! THESE ARE MADE FROM PRECISION GROUND STOCK !
ONLY $4.50
+ $1.00 EACH S&H
OR $39.00 FOR 10
+ $8.00 S&H

Misc Notes from TJ :

SORRY I DON'T HAVE FANCY COLOR BROCHURES,
NO B.S. OR HIGH PRESSURE SALES PITCHES,
NO DEALER OR P.D. DISCOUNTS [ EXCEPT TJ DEALER PART SALES ],
NO 8 MONTH - 3 YEAR "AGING" OF YOUR WEAPON,
SORRY ... I'M NOT "POLITICALLY CORRECT" - AND I DON'T WANT TO BE.
I'M NOT MUCH FOR SMALL TALK - THE WORK DOESN'T GET DONE, SORRY.
I DO NOTHING BUT STRAIGHT HONEST WORK.
I DON'T COMPROMISE MY QUALITY OR MY INTEGRITY.
IF YOU'RE LOOKING FOR A DEAL - CALL SOMEWHERE ELSE . . . . .
BUT. . . . . IF YOU WANT THE HIGHEST LEVEL OF STANDARDS AND PERSONAL ATTENTION,
I WILL GLADLY ACCEPT YOUR BUSINESS AND DO MY UTMOST TO
SERVICE YOUR WEAPON TO A LEVEL HOPEFULLY ABOVE ALL YOUR EXPECTATIONS.

TJ
 


 

REMEMBER . . .

" A JOB WORTH DOING . . . . .
                    . . . IS WORTH DOING WELL. "
 

SHIPPING ADDRESS & INSTRUCTIONS: 

RETURN UPS & INSURANCE CHARGES (PER GUN)

$55.00 2 DAY AIR
$95.00 OVERNIGHT

IF YOU WANT EXTRA $$$ INSURANCE PLEASE INCLUDE EXTRA $$$

((( PLEASE NOTE THIS RIPOFF SHIPPING FEES ARE FROM UPS, NOT ME! )))
( FIXED UPS AVERAGE ESTIMATES BASED ON 5LBS - $1500 INSURANCE - RESIDENTIAL DELIVERY )
  

IN CONTRACTING ANY WORK, YOU AGREE TO MY   FULL DISCLAIMER DISCLOSURE .
 

SORRY NO CHECKS ACCEPTED - NO EXCEPTIONS
SEND CASH/BANK CHECK, MONEY ORDER, OR CASH WITH YOUR GUN.

*  RUSH ORDERS BY APPOINTMENT ONLY  *
 

PLEASE READ MY  CONTACT POLICIES WEB PAGE
FOR PHONE CALLS AND LOCAL CUSTOMER APPOINTMENTS

*  This address is for Shipping ONLY - NO Drop Off's or visitors  ! *
MY SHOP IS CLOSED TO THE PUBLIC
 

UPS or FEDEX GUNS WITH PAYMENT TO:
 

TJ's Custom Gunworks
3347 Caroline Ave.
Culver City, CA, 90232, USA

Click here to E-Mail TJ (PLEASE keep all Questions as BRIEF as possible)
 

Return to TJ's Custom Gunworks Home Page